The TR-7600RC ON-LOOM REED CLEANER cleans the reed with the warp still drawn in. It automatically runs along the top of the reed as it cleans.
PRODUCTS
The TR-7600RC ON-LOOM REED CLEANER cleans the reed with the warp still drawn in. It automatically runs along the top of the reed as it cleans.
This product cleans the reed with the warp still drawn in. It automatically runs along the top of the reed as it cleans.
Previous versions of this device required an electrical power source, but our newest version is a battery-powered, re-chargeable product, allowing for cordless, easier cleaning.
Debris build up in the tunnel groove can affect air flow, but is effectively removed with special brushes, contributing to stable loom operation.
This cleaner can be preset for automatic stopping.
|
Name
|
TR-7600RC
|
|
Use
|
Rotating Brush Type : Moving along tunnel groove, left and right repeatedly.
|
|
Applicable Air Jet Loom Makers
|
All AJL makers : Brush position adjustment is possible
|
|
Rotating Brush Component
|
Speed : 1600 rpm (right and left reversible spin)
|
|
Traveling Speed
|
Approximately 50 cm/min
|
|
Setting of Repeating Time
|
By control knob
|
|
Display
|
Repeating time / Setting time
|
|
Power Source
|
Rechargeable : 100V – 240 V Single Phase
|
|
Time required for full recharged
|
About 8 hours
|
|
Max. Cleaning time at full recharged
|
About 8 hours
|
|
Dimensions
|
210 mm ×160 mm × 113 mm
|
|
Weight
|
2.5 kg
|
